Muzzle Brake Compensator for 9mm PCC
This muzzle brake was designed to reduce felt recoil and eliminate muzzle rise for faster follow up shots on target. Because PCC mostly uses around 130 power factor ammo there is not much gasses left. This muzzle brake is designed for low power factor ammo. This muzzle brake have three vertical expansion chambers to divert us much gasses up, to keep the muzzle flat. After bullet is fired the gasses have tendency to follow bullet in forward direction. To divert those gasses we need flat surface to so gas particles can hit a wall and change their direction. For this purpose hole is made to tight tolerance 9,6mm so bullet with approx diameter of 9,05mm have about 0,25mm space to travel between compensator ports. This muzzle brake is made in three colours: Black, red and blue. And it’s also made for most popular barrel threads. Choose between 1/2 28 TPI, 1/2 36 TPI and 5/8 24 TPI. Please check our barrel thread reference.
- Made from aluminum
- Avaialbe threads: 1/2 28 TPI, 1/2 36 TPI and 5/8 24 TPI.
- 0,25mm between port and bullet.
- Made for low poer factor
1/2 28 TPI, 1/2 36 TPI, 5/8 24 TPI
Black, Blue, Red